Shake CQuartz before use.

Wrap a 4" microfiber suede around the grey side of applicator block. Slowly open bottle and drag one or two lines of product down the applicator.

Spread across paint in a criss cross pattern approximately 50cm x 50cm at a time depending on conditions.

Buff off as soon as it flashes (within 1-2 minutes depending) using a CarPro No Lint Ultra Towel 16" x 16". Be sure to remove all excess residue and only then do you move to the next section.

Switch out the 4" Suedes every 2+/- panels. Additional coats may be applied after 60 minutes or wait until the following day if you are beyond 60 minutes. CarPro recommends 2 coats. Max Layer - 3 coats.

Apply Reload after final coat after 60 mins. Wait until next day for Reload if you miss the 60 minute window or at least a minimum of 12 hrs.